dmesg - 1024 MB DRAM-667MHz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffdfff] ACPI data
BIOS-e820: [mem 0x000000003fffe000-0x000000003fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000fd000000-0x00000000fd7fffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Parallels Software International Inc. Parallels Virtual Platform/Parallels Virtual Platform, BIOS 6.8.23717.1100559 01/16/2015
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff100-0x000ff10f] mapped at [ffff8800000ff100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[mem 0x3fc00000-0x3fdfffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[mem 0x3c000000-0x3fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3fe00000-0x3ffeffff]
[mem 0x3fe00000-0x3ffeffff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
RAMDISK: [mem 0x35b0a000-0x36d7cfff]
ACPI: RSDP 00000000000e8000 000024 (v02 PRLS )
ACPI: XSDT 000000003fff4ac0 000054 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: FACP 000000003fff00c0 0000F4 (v03 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: DSDT 000000003fff0440 0044AF (v02 PRLS PRLSACPI 00001001 INTL 20051216)
ACPI: FACS 000000003fff01c0 000040
ACPI: APIC 000000003fff0200 000216 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: SRAT 000000003fff4900 0000D0 (v02 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: SSDT 000000003fff4a00 000024 (v02 PRLS PRLSACPI 00001001 INTL 20051216)
ACPI: HPET 000000003fff4a40 000038 (v00 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: MCFG 000000003fff4a80 00003C (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: Local APIC address 0xfee00000
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x40000000-0xafffffff] hotplug
SRAT: Node 0 PXM 0 [mem 0x100000000-0x20ffffffff] hotplug
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x3ffeffff] -> [mem 0x00000000-0x3ffeffff]
Initmem setup node 0 [mem 0x00000000-0x3ffeffff]
NODE_DATA [mem 0x3ffeb000-0x3ffeffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:3ffe7001, boot clock
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 258032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 dfl edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 31 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
e820: [mem 0x40000000-0xfcffffff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88003e200000 s82368 r8192 d24128 u131072
pcpu-alloc: s82368 r8192 d24128 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
kvm-clock: cpu 0, msr 0:3ffe7001, primary cpu clock
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257913
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 992604K/1048120K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 55516K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
NR_IRQS:16640 nr_irqs:936 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Detected 2793.268 MHz processor
Calibrating delay loop (skipped) preset value.. 5586.53 BogoMIPS (lpj=11173072)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28554 entries in 112 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.30GHz (fam: 06, model: 3e, stepping: 04)
Performance Events: 16-deep LBR, IvyBridge events, Broken PMU hardware detected, using software events only.
Failed to access perfctr msr (MSR c1 is 0)
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (5586.53 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3fffe000-0x3fffffff] (8192 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:11:18, date: 02/23/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfcffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with reserved [mem 0x000dc000-0x000fffff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfbffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfd7fffff]
pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:2981] type 01 class 0x060401
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1ab8:4000] type 00 class 0xff0000
pci 0000:00:03.0: reg 0x10: [io 0x8000-0x801f]
pci 0000:00:05.0: [8086:100f] type 00 class 0x020000
pci 0000:00:05.0: reg 0x10: [mem 0xee000000-0xee01ffff]
pci 0000:00:05.0: reg 0x1c: [io 0x8200-0x821f]
pci 0000:00:06.0: [8086:100f] type 00 class 0x020000
pci 0000:00:06.0: reg 0x10: [mem 0xee040000-0xee05ffff]
pci 0000:00:06.0: reg 0x1c: [io 0x8400-0x841f]
pci 0000:00:0a.0: [1011:0022] type 01 class 0x060400
pci 0000:00:0e.0: [1af4:1002] type 00 class 0x050000
pci 0000:00:0e.0: reg 0x10: [io 0xb000-0xb01f]
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x4000-0x407f] conflicts with ACPI CPU throttle [??? 0x00004010-0x00004015 flags 0x80000000]
pci 0000:00:1f.1: [8086:244b] type 00 class 0x010180
pci 0000:00:1f.1: reg 0x20: [io 0xe000-0xe00f]
pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xe200-0xe207]
pci 0000:00:1f.2: reg 0x14: [io 0xe400-0xe403]
pci 0000:00:1f.2: reg 0x18: [io 0xe600-0xe607]
pci 0000:00:1f.2: reg 0x1c: [io 0xe800-0xe803]
pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea0f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0100000-0xf0101fff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1ab8:4005] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [io 0x6000-0x601f]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xb01fffff pref]
pci 0000:01:00.0: reg 0x30: [mem 0xe2000000-0xe200ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
pci 0000:00:01.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:01.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xf00fffff]
pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20131115/pci_link-180)
ACPI: Enabled 3 GPEs in block 00 to 0F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 16.000000 MHz counter
Switched to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:04: [mem 0xffc00000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1300-0x133f] has been reserved
system 00:06: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1f.0: BAR 13: [io 0x4000-0x407f] has bogus alignment
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xf00fffff]
pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfd7fffff]
pci_bus 0000:01: resource 0 [io 0x6000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xe2000000-0xedffffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xdfffffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:01: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:01: resource 9 [mem 0xfd000000-0xfd7fffff]
pci_bus 0000:02: resource 0 [io 0x9000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xee100000-0xef0fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe0ffffff pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xef100000-0xf00fffff]
pci_bus 0000:03: resource 2 [mem 0xe1000000-0xe1ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:03: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:03: resource 9 [mem 0xfd000000-0xfd7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18892K (ffff880035b0a000 - ffff880036d7d000)
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1424715078.924:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1975
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90001280000, using 1920k, total 1920k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 62
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
virtio-pci 0000:00:0e.0: enabling device (0000 -> 0001)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ata2: port disabled--ignoring
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:230:191
acpi device:1d: hash matches
rtc_cmos 00:02: setting system clock to 2015-02-23 18:11:19 UTC (1424715079)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[157]: starting version 204
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:05.0 eth0: (PCI:33MHz:32-bit) 00:1c:42:dd:50:aa
e1000 0000:00:05.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led only slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100100 irq 40
ata4: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100180 irq 40
ata5: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100200 irq 40
ata6: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100280 irq 40
ata7: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100300 irq 40
ata8: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100380 irq 40
e1000 0000:00:06.0 eth1: (PCI:33MHz:32-bit) 00:1c:42:2d:6e:19
e1000 0000:00:06.0 eth1: Intel(R) PRO/1000 Network Connection
tsc: Refined TSC clocksource calibration: 2793.245 MHz
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6: harddisk1, F.S9G6E4, max UDMA/100
ata3.00: 104857600 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA harddisk1 F.S9 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 35 bits of entropy available
init: plymouth-upstart-bridge main process (218) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (228) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (231) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (233) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (236) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (241) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[351]: starting version 204
lp: driver loaded but no devices found
prl_tg: module license 'Parallels' taints kernel.
Disabling lock debugging due to kernel taint
prl_tg: module verification failed: signature and/or required key missing - tainting kernel
Parallels Toolgate driver 1.0.0 loaded
detected Parallels ToolGate, base addr 00008000, IRQ 22
detected Parallels Video ToolGate, base addr 00006000, IRQ 21
Parallels Linux shared folders filesystem driver 1.0.0 loaded
systemd-udevd[405]: renamed network interface eth0 to eth2
lpc_ich 0000:00:1f.0: RCBA is disabled by hardware/BIOS, device disabled
ACPI Warning: 0x0000000000004028-0x000000000000402f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
lpc_ich: Resource conflict(s) found affecting gpio_ich
lpc_ich 0000:00:1f.0: No MFD cells added
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
type=1400 audit(1424715083.697:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"
type=1400 audit(1424715083.697:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
type=1400 audit(1424715083.697:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
type=1400 audit(1424715083.697:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
type=1400 audit(1424715083.697:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
type=1400 audit(1424715083.697:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
device-mapper: multipath: version 1.6.0 loaded
init: failsafe main process (778) killed by TERM signal
type=1400 audit(1424715209.658:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.658:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.658:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.658:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.658:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.658:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1110 comm="apparmor_parser"
type=1400 audit(1424715209.674:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1112 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7924 buckets, 31696 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-upstart-bridge main process ended, respawning
init: networking post-stop process (1409) terminated with status 100
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: networking post-stop process (2064) terminated with status 100
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
init: networking post-stop process (2707) terminated with status 100
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
init: networking post-stop process (3308) terminated with status 100
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
init: networking post-stop process (3913) terminated with status 100
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready